Spartan-6 LX16 Evaluation Kit

[WimdeValk]

Hello,

The evaluation kit user manual contains a note about the 3V3 power for the J6 and J8 PMOD connectors having to be turned on by enabling the FPGA_LS1CTL signal. The applicable FPGA pin (M14), however is not mentioned. Detailed inspection of the set of schematic drawings is therefore required to find this out.

Regards,

Wim de Valk.

[narrucmot]

Thank you for bringing this to our attention.  We will add the FPGA pin for the FPGA_LS1CTL signal to the board and kit documentation in a future revision.