02-14-2012 02:10 PM - edited 02-14-2012 02:12 PM
Section 2.1 and Figure 4 in xlx_s9_lx9_fpga_microboard-ug072711.pdf (Rev B, 07/27/2011)
show the pmod io in bank0 and LEDs in bank2, but I think that should be bank1 and bank3.
I ask because I want to configure the pmod io pins to use lvds which I understand is availble only on banks0 and 2.
02-14-2012 02:58 PM
It looks like there is an error in that figure. The Pmods are indeed in Bank 1. The Rev. B schematics are correct.
We will get that fixed.